CHIPP S003 clothing question
+6
MagnumManipulator
eldoobya
DROBOT
Gatiio
vicjeb
agentzuluka
10 posters
Page 1 of 1
CHIPP S003 clothing question
Recently I've received a CHIPP S003 from the CAD member and got this:
Does anyone else have such an issue with arms and clothing on his Chipp?
Does anyone else have such an issue with arms and clothing on his Chipp?
agentzuluka- CAD Grunt
- Posts : 177
Join date : 2011-07-18
Re: CHIPP S003 clothing question
i dont have this squadt
but my friend said he has the same problem
but my friend said he has the same problem
vicjeb- CAD Born Again Hard
- Posts : 495
Join date : 2012-05-14
Location : Australia
Re: CHIPP S003 clothing question
ink will do that. have you tried some rubbing alcohol on it? go with soap and water first, then more abrasive things.
If anything, its under the clothes, so it should be ok.
If anything, its under the clothes, so it should be ok.
Re: CHIPP S003 clothing question
Gatiio wrote:ink will do that. have you tried some rubbing alcohol on it? go with soap and water first, then more abrasive things.
If anything, its under the clothes, so it should be ok.
my friend use Chivas12 to finally get rid of those ink
vicjeb- CAD Born Again Hard
- Posts : 495
Join date : 2012-05-14
Location : Australia
Re: CHIPP S003 clothing question
The Chipp I used for a custom had the same thing. Neither alcohol or acetone would take it off. Didn't really matter to me since I was painting it though.
Might be easier to track down a set of GID arms and just replace them if you want to pull the sleeves up.
Might be easier to track down a set of GID arms and just replace them if you want to pull the sleeves up.
Guest- Guest
Re: CHIPP S003 clothing question
gregm wrote:The Chipp I used for a custom had the same thing. Neither alcohol or acetone would take it off. Didn't really matter to me since I was painting it though.
Might be easier to track down a set of GID arms and just replace them if you want to pull the sleeves up.
did u use the water-based or oil-based painting ?
vicjeb- CAD Born Again Hard
- Posts : 495
Join date : 2012-05-14
Location : Australia
Re: CHIPP S003 clothing question
vicjeb wrote:gregm wrote:The Chipp I used for a custom had the same thing. Neither alcohol or acetone would take it off. Didn't really matter to me since I was painting it though.
Might be easier to track down a set of GID arms and just replace them if you want to pull the sleeves up.
did u use the water-based or oil-based painting ?
Used Monster Kolor.
Guest- Guest
Re: CHIPP S003 clothing question
The person who sold you that figure didn't tell you that the arms were stained?
If so than, that's bad business.
Get cha ceddah back.
If so than, that's bad business.
Get cha ceddah back.
Re: CHIPP S003 clothing question
Mine had the same thing to the arms.
I dont think you will find a Halloween Chipp that does have perfectly clean arms.
I dont think you will find a Halloween Chipp that does have perfectly clean arms.
eldoobya- CAD Too Buku
- Posts : 1490
Join date : 2009-06-15
Re: CHIPP S003 clothing question
Yeah, I had the same problem with mine too.
I swapped the arms from my GID NKD Nozzel, and the ink stained those too!
It will be almost impossible to find one that doesn't have the same issue! I think your best option is to just leave it like it is.
I swapped the arms from my GID NKD Nozzel, and the ink stained those too!
It will be almost impossible to find one that doesn't have the same issue! I think your best option is to just leave it like it is.
MagnumManipulator- CAD Too Buku
- Posts : 1343
Join date : 2012-01-05
Age : 37
Location : California
reply
I never noticed mine for along time then I realized It one day just left It as is .
dedicatedart- CAD Animal Mother
- Posts : 1817
Join date : 2011-12-29
Location : Driving through your moms triangle.
Re: CHIPP S003 clothing question
Yes, they are all like this. I don't have any issue with it as he's in his little skel suit, but I could see an issue if you were changing to a short sleeved shirt....
Re: CHIPP S003 clothing question
All of them are like this, I got one from chiprender and it's identical. I wouldn't worry too much about it the skelsuit should cover it up
yanyaniscool- CAD Special Forces
- Posts : 725
Join date : 2012-02-10
Re: CHIPP S003 clothing question
Yup I bought a used one and same deal on the arms :/
SaulSNES- CAD Recruit
- Posts : 72
Join date : 2012-05-18
Age : 33
Location : Miami FL
Page 1 of 1
Permissions in this forum:
You cannot reply to topics in this forum
|
|