New Member of the Squadt WIP
4 posters
Page 1 of 1
New Member of the Squadt WIP
Hey everybody,
I'm currently working on a GID Munny but I'm a bit stuck at the moment. I've sculpted a mask and sanded it down, also added some tubing and connected them to some old iron tubes. I was thinking of making him some sort of backpack to hang the tubes on. I stilll have to pait the mask after some finer sanding, anybody got some suggestions to what paint to use Prolly gonna pait him in the FROZN colour scheme. Let me know what you guys think!
Then after some sanding:
And in Blacklight haha:
I'm currently working on a GID Munny but I'm a bit stuck at the moment. I've sculpted a mask and sanded it down, also added some tubing and connected them to some old iron tubes. I was thinking of making him some sort of backpack to hang the tubes on. I stilll have to pait the mask after some finer sanding, anybody got some suggestions to what paint to use Prolly gonna pait him in the FROZN colour scheme. Let me know what you guys think!
Then after some sanding:
And in Blacklight haha:
Last edited by JasperF on Sun Apr 28, 2013 5:13 am; edited 1 time in total
JasperF- CAD Too Buku
- Posts : 1002
Join date : 2012-05-16
Age : 38
Location : Utrecht, the Netherlands
Re: New Member of the Squadt WIP
i have no suggestion on paint type since i'm not an artist, but i do like the concept....will you be reducing the length of the hoses leading to the tubes?
LonerStoner- c0113c70r_D3$7r0y3r
- Posts : 4746
Join date : 2009-08-13
Location : the party bowl
Re: New Member of the Squadt WIP
LonerStoner wrote:i have no suggestion on paint type since i'm not an artist, but i do like the concept....will you be reducing the length of the hoses leading to the tubes?
Not sure yet, somehow I like how the tubes 'flow' around him (didn't know how else to put it into words haha)
JasperF- CAD Too Buku
- Posts : 1002
Join date : 2012-05-16
Age : 38
Location : Utrecht, the Netherlands
Re: New Member of the Squadt WIP
instead of a backpack why not have the canisters attached to the front. You could have one facing each direction and shorten the hoses or have each one twist around the body to meet up around the front. Does that make sense? And I don't know if you were planning on putting squadt eyes on him but since he's gid clear ones would be bad ass
edstuff- CAD Too Buku
- Posts : 1212
Join date : 2010-11-22
Age : 46
Location : Chicago
Re: New Member of the Squadt WIP
edstuff wrote:instead of a backpack why not have the canisters attached to the front. You could have one facing each direction and shorten the hoses or have each one twist around the body to meet up around the front. Does that make sense? And I don't know if you were planning on putting squadt eyes on him but since he's gid clear ones would be bad ass
Have no idea what you mean with the tubes haha. The squadt lenses are a VERY good idea, thought of it but didn't do it because FERG said: Don't rip my shit haha. Perhaps I should reconsider...
JasperF- CAD Too Buku
- Posts : 1002
Join date : 2012-05-16
Age : 38
Location : Utrecht, the Netherlands
Re: New Member of the Squadt WIP
Oh well if ferg said no then yeah...
as far as the hoses I just meant for them to wrap around the body and meet at the front. But to have one go to the left and one to the right.
as far as the hoses I just meant for them to wrap around the body and meet at the front. But to have one go to the left and one to the right.
edstuff- CAD Too Buku
- Posts : 1212
Join date : 2010-11-22
Age : 46
Location : Chicago
Re: New Member of the Squadt WIP
edstuff wrote:Oh well if ferg said no then yeah...
as far as the hoses I just meant for them to wrap around the body and meet at the front. But to have one go to the left and one to the right.
Aaah like that, is see what you mean now. And concerning FERG's 'no'; it was about someone else's project, so perhaps I could reconsider haha
JasperF- CAD Too Buku
- Posts : 1002
Join date : 2012-05-16
Age : 38
Location : Utrecht, the Netherlands
Re: New Member of the Squadt WIP
interesting concept, but I would only suggest leaving the hoses that long if its going to be a diorama or some extra carriage attached to "carry" the thanks, otherwise it would be a very difficult piece to place with others.
That said, Its looking interesting, the placing of the eyes is very funny.
That said, Its looking interesting, the placing of the eyes is very funny.
Re: New Member of the Squadt WIP
Gatiio wrote:interesting concept, but I would only suggest leaving the hoses that long if its going to be a diorama or some extra carriage attached to "carry" the thanks, otherwise it would be a very difficult piece to place with others.
That said, Its looking interesting, the placing of the eyes is very funny.
Going to brainstorm about that carriage idea, thanks for the suggestions!
JasperF- CAD Too Buku
- Posts : 1002
Join date : 2012-05-16
Age : 38
Location : Utrecht, the Netherlands
Re: New Member of the Squadt WIP
Ok so I was bound to my parents house for the last few days and could only quickly grab a couple of things before leaving from home, this was among it. Finally gotten around to painting the facemask. That 3dot pattern is a bitch to imitate! Anybody got tips for finishing it off with a matte coating of some sort?
And here he is with the team:
Still not totally happy with the tubes so still debating how to finish him haha
Let me know what you guys think!
And here he is with the team:
Still not totally happy with the tubes so still debating how to finish him haha
Let me know what you guys think!
JasperF- CAD Too Buku
- Posts : 1002
Join date : 2012-05-16
Age : 38
Location : Utrecht, the Netherlands
Re: New Member of the Squadt WIP
i do like the pattern on the mask, goes well with the Frzn squats...
LonerStoner- c0113c70r_D3$7r0y3r
- Posts : 4746
Join date : 2009-08-13
Location : the party bowl
Re: New Member of the Squadt WIP
Thanks Loner, that is exactly what I'm going for, still need to hang his tanks and stuff hahaLonerStoner wrote:i do like the pattern on the mask, goes well with the Frzn squats...
JasperF- CAD Too Buku
- Posts : 1002
Join date : 2012-05-16
Age : 38
Location : Utrecht, the Netherlands
Similar topics
» lost squadt member iDo
» Squadt Doctor Exclusive- Would anyone mule for a UK C&D Member
» Catalog of CAD Member's Most Wanted Squadt Item
» Hey all, new member
» French CAD member wanted!
» Squadt Doctor Exclusive- Would anyone mule for a UK C&D Member
» Catalog of CAD Member's Most Wanted Squadt Item
» Hey all, new member
» French CAD member wanted!
Page 1 of 1
Permissions in this forum:
You cannot reply to topics in this forum
|
|