ASPP Custom Sqwert Process Thread
+7
marshhouse
whacko
dreamattack27
darkghost973
BigC
Assburrito!
ASPrintingPress
11 posters
Page 1 of 2
Page 1 of 2 • 1, 2
ASPP Custom Sqwert Process Thread
I thought I would post the first process thread in this nice new forum of ours kindly created by Ferg and VB.
This is just the start of two Sqwerts that I'll be customizing, I will post progress pics here and answer any questions that may come up. Sorry for the crappy pics, all I had this morning was my phone.
Yup those are real rivets.
This is just the start of two Sqwerts that I'll be customizing, I will post progress pics here and answer any questions that may come up. Sorry for the crappy pics, all I had this morning was my phone.
Yup those are real rivets.
Re: ASPP Custom Sqwert Process Thread
Interesting! You have my attention now!
I'm about to start my first bud custom tomorrow. I haven't decided if I should primer it or just start painting. Any advice?
I'm about to start my first bud custom tomorrow. I haven't decided if I should primer it or just start painting. Any advice?
Re: ASPP Custom Sqwert Process Thread
ok...for eal real
does ass burrito really mean fut
butt fuckin? that's what it seems like to me for real. am I re right? oh and iST sw ts still owe you something for that contest....waht td od do you want a man?
does ass burrito really mean fut
butt fuckin? that's what it seems like to me for real. am I re right? oh and iST sw ts still owe you something for that contest....waht td od do you want a man?
BigC- c0113c70r_D3$7r0y3r
- Posts : 4514
Join date : 2008-07-04
Location : Bay Area California
Re: ASPP Custom Sqwert Process Thread
BigC wrote:ok...for eal real
does ass burrito really mean fut
butt fuckin? that's what it seems like to me for real. am I re right? oh and iST sw ts still owe you something for that contest....waht td od do you want a man?
No assburrito isn't a name for a butt . It was a name I gave a co-worker years ago. He had intestinal problems and wasn't supposed to eat hot or spicy foods. He did it anyway, a lot! One day after lunch he fell asleep at his computer. Nothing new, we we're all used to him doing that. Well on this day something different happened. Everybody was working in the shop, and he wakes up, freaks out, grabs his ass, and runs like hell to the bathroom. 30 mins later he comes out, and looks like he just fought 20+ ninjas. He explains to us, in detail, what he did. He ate burritos for lunch, and covered them in hot sauce. His medical condition combined with the burritos turned his ass into a volcano of destruction. We all laughed and had a blast teasing him about it. So the next day at work I brought him a cape and nicknamed him Captain Assburrito!. When I started to do stickers and street art I wanted to come up with a name people would remember. Hence Assburrito! was born
Re: ASPP Custom Sqwert Process Thread
thats fucking hilarious im talking about assburito's name not your custom
darkghost973- CAD Too Buku
- Posts : 894
Join date : 2008-07-04
Location : New Jersey
Re: ASPP Custom Sqwert Process Thread
Excellent.
dreamattack27- c0113c70r_D3$7r0y3r
- Posts : 3825
Join date : 2008-07-04
Age : 49
Location : Land Of Sunshine, SDCA
Re: ASPP Custom Sqwert Process Thread
Assburrito! wrote:Interesting! You have my attention now!
I'm about to start my first bud custom tomorrow. I haven't decided if I should primer it or just start painting. Any advice?
Prime that baby, Rustoleum makes a clear primer made for plastic it's a beautiful thing, you can get it at Lowes or Home Depot. More pics to come in just a bit.
Re: ASPP Custom Sqwert Process Thread
Here is the base coat, Mil. Green and Light Mil. Gray. I also primed these really well.
Here is the front and sides. All the outlines are done, now the real fun coloring these with One Shot. It's the real deal old school lead based enamel. Also the names of these are actually B-29 bomber names, Kritzer Blitzer and Snake Bit. Once I paint these they should look a lot tighter. Also the finger prints and lead marks left over from the outlines will kinda fade away after I distress them with a little rust and old fashioned beating.
Here is the front and sides. All the outlines are done, now the real fun coloring these with One Shot. It's the real deal old school lead based enamel. Also the names of these are actually B-29 bomber names, Kritzer Blitzer and Snake Bit. Once I paint these they should look a lot tighter. Also the finger prints and lead marks left over from the outlines will kinda fade away after I distress them with a little rust and old fashioned beating.
Re: ASPP Custom Sqwert Process Thread
Finally got the painting done last night. I used good ol' one shot lead paint, old school to give it more of a 40's flavor. Now all I have to do is distress them a little and add some rust. Enjoy.
Re: ASPP Custom Sqwert Process Thread
Nicely done!!
dreamattack27- c0113c70r_D3$7r0y3r
- Posts : 3825
Join date : 2008-07-04
Age : 49
Location : Land Of Sunshine, SDCA
Re: ASPP Custom Sqwert Process Thread
Both of those look sweet. Please post non-rotating pics when you get them all scuffed up!
Re: ASPP Custom Sqwert Process Thread
Thanks guys, I will do still shots once they are done. I should have slowed down the animation before posting so you could see the detail.
Re: ASPP Custom Sqwert Process Thread
are those for me?
BigC- c0113c70r_D3$7r0y3r
- Posts : 4514
Join date : 2008-07-04
Location : Bay Area California
Re: ASPP Custom Sqwert Process Thread
FUCK YES!!!
doug- CAD Born Again Hard
- Posts : 324
Join date : 2008-07-05
Re: ASPP Custom Sqwert Process Thread
Those turned out great!
dreamattack27- c0113c70r_D3$7r0y3r
- Posts : 3825
Join date : 2008-07-04
Age : 49
Location : Land Of Sunshine, SDCA
Re: ASPP Custom Sqwert Process Thread
^^^^(big brother is watching you!)^^^^
Hmm, we must be quiet to be bringing back old threads...
But since we are, your Sqwerts looks damn killer!
Also, what did you use to get the rust effect?
Hmm, we must be quiet to be bringing back old threads...
But since we are, your Sqwerts looks damn killer!
Also, what did you use to get the rust effect?
Re: ASPP Custom Sqwert Process Thread
Thanks guys.
I used real rust, for real this shit gets everywhere. Just look on youtube for making rust.
whacko wrote:^^^^(big brother is watching you!)^^^^
Hmm, we must be quiet to be bringing back old threads...
But since we are, your Sqwerts looks damn killer!
Also, what did you use to get the rust effect?
I used real rust, for real this shit gets everywhere. Just look on youtube for making rust.
Re: ASPP Custom Sqwert Process Thread
ASPrintingPress wrote:Thanks guys.whacko wrote:^^^^(big brother is watching you!)^^^^
Hmm, we must be quiet to be bringing back old threads...
But since we are, your Sqwerts looks damn killer!
Also, what did you use to get the rust effect?
I used real rust, for real this shit gets everywhere. Just look on youtube for making rust.
Did you jusst powder it and apply it with glue?
Page 1 of 2 • 1, 2
Similar topics
» BUD custom.... process thread
» ASPP 13º Knights of the Royal Arch Bud & Sqwert set
» MAP MAP custom Sqwert for When Worlds Collide Show
» ASPP Big Brother Glow Custom *DONE*
» ASPP custom 3A DIY wwrp de Plume JEA
» ASPP 13º Knights of the Royal Arch Bud & Sqwert set
» MAP MAP custom Sqwert for When Worlds Collide Show
» ASPP Big Brother Glow Custom *DONE*
» ASPP custom 3A DIY wwrp de Plume JEA
Page 1 of 2
Permissions in this forum:
You cannot reply to topics in this forum
|
|