Best way to pop out the eye lenses?
+18
CankleBreaker
cripery
Teimaru
Gatiio
LonerStoner
JEEMAC
ShelfLife
Casper_NY
quentdiggy
Colossus of Destiny
ludok
dedicatedart
Conspyre
Eric
edstuff
itsa_mia
Admin
chiprender
22 posters
Page 1 of 2
Page 1 of 2 • 1, 2
Re: Best way to pop out the eye lenses?
heat the helmet.
you can use a hair dryer (don't point directly at the lenses), hot water or a microwave (short bursts)
you can use a hair dryer (don't point directly at the lenses), hot water or a microwave (short bursts)
Re: Best way to pop out the eye lenses?
microwave? howd u figure that out?
hmmm wonder whatll happen if...
hmmm wonder whatll happen if...
Re: Best way to pop out the eye lenses?
I heard of someone using the microwave method too on a figure. I prefer hot water myself
edstuff- CAD Too Buku
- Posts : 1212
Join date : 2010-11-22
Age : 46
Location : Chicago
Re: Best way to pop out the eye lenses?
I used a safety pin and was reallllllly careful. Popped out no problem. My luck I'd put it in the microwave and come out with a puddle.
Re: Best way to pop out the eye lenses?
Sorry about the threadomancy, but this seemed relevant again in the wake of the Squadt Assembly opening- I'm actually having some trouble getting my lenses to stay IN the Germ mask- any tips, or should I be running some PVA glue around the edge or something?
Conspyre- Posts : 4
Join date : 2013-04-06
Re: Best way to pop out the eye lenses?
my concern with using any glue would be paint removal if u want to switch again
but im sure if its just a toothpick amount in a couple spots on the edge ud be fine
i bet something like elmers white glue would be ok
id stay away from model glue or any kind that melts plastic
and welcome
but im sure if its just a toothpick amount in a couple spots on the edge ud be fine
i bet something like elmers white glue would be ok
id stay away from model glue or any kind that melts plastic
and welcome
Re: Best way to pop out the eye lenses?
Thanks for the welcome!
PVA is like Elmers or Tacky glue, its usually safe on clear plastic, but like you say, might be a pain if I ever decide to change it. I'm also a little concerned about the tampo on the lenses (GID bug) and the spray around the eye holes on the helmet. Maybe it's just a little mooshed, and a shot with a hair dryer or a quick zap will help it right itself? I need to take a look at it alongside my other Squadt, see if there is any visible shape difference.
PVA is like Elmers or Tacky glue, its usually safe on clear plastic, but like you say, might be a pain if I ever decide to change it. I'm also a little concerned about the tampo on the lenses (GID bug) and the spray around the eye holes on the helmet. Maybe it's just a little mooshed, and a shot with a hair dryer or a quick zap will help it right itself? I need to take a look at it alongside my other Squadt, see if there is any visible shape difference.
Conspyre- Posts : 4
Join date : 2013-04-06
Re: Best way to pop out the eye lenses?
oh gid bugs grats!
i wonder if its possible to take up the space with something
maybe if u cut a small circle of cloth (maybe something even thinner, paper?)
and put that in the eye, then the lens
might work?
hard to say without being hands on
sry just late nite rambling
i wonder if its possible to take up the space with something
maybe if u cut a small circle of cloth (maybe something even thinner, paper?)
and put that in the eye, then the lens
might work?
hard to say without being hands on
sry just late nite rambling
Re: Best way to pop out the eye lenses?
Best way too remove eyes hair dryer and tweezers .
Best way too get loose eyes too stay would be heat up the head and place lens in the socket , and let the eye socket for too the lens .
Best way too get loose eyes too stay would be heat up the head and place lens in the socket , and let the eye socket for too the lens .
dedicatedart- CAD Animal Mother
- Posts : 1817
Join date : 2011-12-29
Location : Driving through your moms triangle.
Re: Best way to pop out the eye lenses?
dedicatedart wrote:Best way too remove eyes hair dryer and tweezers .
Best way too get loose eyes too stay would be heat up the head and place lens in the socket , and let the eye socket for too the lens .
First round of heating (with the microwave, can't remember where the hair dryer ended up after moving) got things pretty toasty, but the eyes are still falling out. There doesn't seem to be anything in there to actually grip the edges of the lenses, not sure if that's a manufacturing flaw or if I just need to get him hotter. Once I find the hair dryer, I can get more targeted with the heat- I didn't want to go much longer in the microwave, as the thinner inside of the helmet was getting soft.
Conspyre- Posts : 4
Join date : 2013-04-06
Re: Best way to pop out the eye lenses?
An advice be careful with the glue.I ruined my first squadt with that and the same problem.A toothpick is not a bad idea for fix the glue.
ludok- CAD Grunt
- Posts : 191
Join date : 2012-04-24
Location : france
Re: Best way to pop out the eye lenses?
ludok wrote:An advice be careful with the glue.I ruined my first squadt with that and the same problem.A toothpick is not a bad idea for fix the glue.
What kind of glue did you use? If it's white glue, you might be able to soak it in warm water to get it to let go.
Conspyre- Posts : 4
Join date : 2013-04-06
Re: Best way to pop out the eye lenses?
I read somewhere on these forums that hairgel works well. Never tried it myself, but it seems plausible - tacky enough, but not permanent or corrosive.
Colossus of Destiny- CAD Animal Mother
- Posts : 1573
Join date : 2009-05-22
Age : 40
Re: Best way to pop out the eye lenses?
Conspyre wrote:Sorry about the threadomancy, but this seemed relevant again in the wake of the Squadt Assembly opening- I'm actually having some trouble getting my lenses to stay IN the Germ mask- any tips, or should I be running some PVA glue around the edge or something?
glues dots (the removable kind) work real well. just rip off a tiny piece and place it near the edge of the lens in a couple of places.
museum gel also works really well.
Re: Best way to pop out the eye lenses?
Ummm... put away the power tools boys:
quentdiggy wrote:Okay so three days off work with the flu had me messing with my NKD Squadts and I have always hated trying to pick the eyes out if you want to change them. Well, just use a NERF Suction Dart, you know these?
Stick it on and pull-they come right out. I'm apparently a Goddamn genius on excedrin cold medicine.
Oh my God. Works SO good. Never will I pick again!
quentdiggy- CAD Special Forces
- Posts : 597
Join date : 2011-06-16
Age : 48
Location : MPLS/STPAUL
Re: Best way to pop out the eye lenses?
ya 'pop out' was so 2011
the new thing is keeping them in
colossus the hair gel was mine cause i didnt have any glue lol
the new thing is keeping them in
colossus the hair gel was mine cause i didnt have any glue lol
Re: Best way to pop out the eye lenses?
quentdiggy wrote:Ummm... put away the power tools boys:quentdiggy wrote:Okay so three days off work with the flu had me messing with my NKD Squadts and I have always hated trying to pick the eyes out if you want to change them. Well, just use a NERF Suction Dart, you know these?
Stick it on and pull-they come right out. I'm apparently a Goddamn genius on excedrin cold medicine.
Oh my God. Works SO good. Never will I pick again!
Funny as hell when you pulled one out of your ass It seemed like at the show haha nice meeting you man .
dedicatedart- CAD Animal Mother
- Posts : 1817
Join date : 2011-12-29
Location : Driving through your moms triangle.
Re: Best way to pop out the eye lenses?
I'm curious to how the "short bursts in a microwave" method works lmao
Casper_NY- CAD Grunt
- Posts : 136
Join date : 2013-04-04
Location : New York
Re: Best way to pop out the eye lenses?
Can confirm suction cups and nerf darts are solid choices...
ShelfLife- Pyle
- Posts : 14
Join date : 2013-04-10
Re: Best way to pop out the eye lenses?
ShelfLife wrote:Can confirm suction cups and nerf darts are solid choices...
This response just made my day lmfao
Casper_NY- CAD Grunt
- Posts : 136
Join date : 2013-04-04
Location : New York
Re: Best way to pop out the eye lenses?
yep, I also use the dart method as quent suggested. And if the suction is too weak, I use a folded piece of duct tape. I did use a pin when I first started popping lenses out, but ended up scratching the lens.
JEEMAC- CAD Too Buku
- Posts : 953
Join date : 2012-01-09
Location : California
Page 1 of 2 • 1, 2
Similar topics
» Trade my 3 BLUE lenses for 3 GREEN lenses [willing to buy also]
» new lenses
» GID lenses
» cripery's 'customizing'
» WTB: Red Lenses
» new lenses
» GID lenses
» cripery's 'customizing'
» WTB: Red Lenses
Page 1 of 2
Permissions in this forum:
You cannot reply to topics in this forum
|
|